Touch Screen Operation Copper Wire Tinning Machine / Induction Annealing Machine
Copper Wire Tinning Machine Description:
- The annealer integral type, total thickness is 500mm, and 100mm much thicker than general supplier’s design. The heat preservation effect is good. This type can save 30% of electricity.
- The annealer, oven and tinning furnace is tube type. Easy to replace and maintenance.
- The two ends of the furnace tube all ceramic sleeve design, to prevent the wire be scratched.
- The water tank is re-cycle design and with water tank and pump.
- The two ends of the hauling drum with revolving joints and can connect the re-cycle water for cooling.
- The take up two ends is with clapboard design, to prevent broken wire effect the connecting wires.
- Below the annealing furnace and upper of the take up has lights design, easy for workers to operate the wire.
Copper Wire Tinning Machine Specification:
| Equipment model |
FC-T20/630 |
FC-T42/630 |
FC-T48/630 |
FC-T60/630 |
| Twisting usage |
mainly for BVR conductor annealing,especially for high speed bunching,to promote the quality of wire, |
Mainly used for round copper wire annealing tin to use, and will share more copper wire at the same time in 630 iron plate
. |
| inlet wire dia |
φ0.41～φ0.64mm |
φ0.15～φ0.64mm |
φ0.15～φ0.32mm |
| max numbers of inlet wire |
20 |
42 |
48 |
60 |
| linear speed |
max:150m/min |
max:260m/min |
| pay off type |
brush pay off or far end pay off |
| pay off bobbin type |
dia300mm bobbin |
| annealing length |
6m |
5m |
| annealing type |
tube annealing |
| annealing protection type |
water seal protection |
| annealing power |
32KW |
54KW |
94KW |
92KW |
| drying device |
high pressure worm fan+blower |
| oven length |
1.5m |
1.2m |
| hauling |
active hauling +passive hauling control |
active hauling device controller |
| tinned type |
/ |
hot dip |
/ |
| take up control |
inverter control torque motor take up |
| take up operation mode |
touch screen operation |
| take up bobbin |
2~6pcs 630bobbin take up(can according to customer's requirement) |
| traverse control type |
servo motor+ball screw precision traverse |
| installation size(mm) |
23000L*3000W*2100H |
26000L*3000W*2100H |
25000L*2200W*2400H |
27000L*2200W*2300H |
Other information:
Terms of payment:
FOB Shanghai
Payment terms:
30% down payment,70% before shipment
Delivery time:
45days after receive the downpayment
Minimum order:
1set
Package:
With container
