Main performance of FC-T40 high speed annealing tinning machine
Description:
- The annealer integral type, total thickness is 500mm, and 100mm much thicker than general supplier’s design. The heat preservation effect is good. This type can save 30% of electricity.
- The annealer, oven and tinning furnace is tube type. Easy to replace and maintenance.
- The two ends of the furnace tube all ceramic sleeve design, to prevent the wire be scratched.
- The water tank is re-cycle design and with water tank and pump.
- The two ends of the hauling drum with revolving joints and can connect the re-cycle water for cooling.
- The take up is 44 heads single layer design. Another four heads is for prepare.
- Is fit for human’s height. Can be operated easily.
- The take up two ends is with clapboard design, to prevent broken wire effect the connecting wires.
- Below the annealing furnace and upper of the take up has lights design, easy for workers to operate the wire.
Specification:
| Item | Quantity | Reference |
| Components for annealing tin unit as follows: | | |
| 1.Pay-off rack(40heads pay off) | 1 set | |
| (1)Bobbin:φ300*φ127*270 | | Pay off cap is customer prepare |
| (2) vertical brush pay off | | |
| 2. Annealing furnace ( tube annealing) | 1 set | |
| (1)6m,zone 3 temperature control | | Body6000*1250*500mm |
| (2)304stainless steel annealer tube | 40sets | Tube:φ14*φ10*7000 |
| (3)annealing wire: φ0.15-φ0.68mm | | |
| (4)annealing power:40.5KW | | 304stainless steel heating tube:750W*54pcs |
| 3.Water tank | 1set | |
| (1)SUS304stainless steel water tank | 1set | |
| (2)water tank+JP125 pump | 1set | |
| 4.Dryer part | 1set | |
| (1)High pressure fan | 1set | |
| (2)Blower | 1set | |
| (3)Wiper | 1set | |
| 5. Oven part(heating tube heat) | 1set | |
| (1)Heating power:6KW | | |
| (2)304stainless heating tube:1000W*6pcs | | |
Other information:
On terms of payment: FOB Shanghai
Delivery date: 30% T/T advance,70% before shipment
Country of origin: China
Mininum order: 1 set
Package: comfortable for container
