Kunshan Fuchuan Electrical and Mechanical Co.,ltd
MORE THAN PROFESSION SMART FROM FUCHUAN Contact Ms Spring WhatsApp/wechat:008618012661732/15806265585 MAIL:yw1@fcjd88.com
Add to Cart
China Fuchuan Wire Annealing Machine
Description:
1. The annealer integral type, total thickness is 500mm, and 100mm much thicker than general supplier’s design. The heat preservation effect is good. This type can save 30% of electricity.
2. The annealer, oven and tinning furnace is tube type. Easy to replace and maintenance.
3. The two ends of the furnace tube all ceramic sleeve design, to prevent the wire be scratched.
4. The water tank is re-cycle design and with water tank and pump.
5. The two ends of the hauling drum with revolving joints and can connect the re-cycle water for cooling.
6. The take up is 44 heads single layer design. Another four heads is for prepare.
7. Is fit for human’s height. Can be operated easily.
8. The take up two ends is with clapboard design, to prevent broken wire effect the connecting wires.
9. Below the annealing furnace and upper of the take up has lights design, easy for workers to operate the wire.
Specification:
| Equipment models | FC-T12 | FC-T16 | FC-T24 | FC-T32 | FC-T40 |
| Twisting usage | Apply for the annealing of ultra-fine round copper wire and alloy wire. | ||||
| Single wire dia(mm) | 0.08～0.25mm/0.15～0.64mm | ||||
| Max numbers of inlet wire | 12 | 16 | 24 | 32 | 40 |
| Linear speed | MAX:300m/min | ||||
| Pay off method | Brush pay off | ||||
| Pay off bobbin model | 300bobbin | ||||
| Annealing furnace length | 3.5m-6.0m | ||||
| Annealing method | Tube annealing | ||||
| Annealing protection method | Water seal protection | ||||
| Tinned method | Hot dip | ||||
| Capstan control method | Inverter+ motor control or adopt stepless speed regulation motor | ||||
| Equipment total power | 51KW | 53KW | 61KW | 63KW | 68KW |
| Take up control | Take up is voltage regulator control the moment motor | ||||
| Take up bobbin size | 5inch,8inch bobbin or 5inch,8inch,10inch bobbin,300 bobbin | ||||
| Traverse control method | Stepless speed regulation motor+ turbine gear box control toothrow traverse | ||||
| Installation size (mm) | 13000*1500*2100 | 14500*1500*2100 | 18000*1500*2100 | 20000*1500*2100 | 24000*2200*2100 |
Other information:
Terms of payment:
FOB Shanghai
Payment terms:
30% down payment,70% before shipment
Delivery time:
45days after receive the downpayment
Minimum order:
1set
Package:
With container